TAVRIDA ELECTRIC Rec15/25 Al1 5p, User Manual, Page: 76 / 136

76
3) In Database browser, open the appropriate network model (Figure 78);
4) Double click on the submenu “TDI”
Database browser -> Model ->Communication settings->TDI;
5) The corresponding communication settings window will popup. Alternatively, open it directly from the logs
menu as described in previous chapter.
The TDI settings can be changed in the applicable range.
Figure 78
Changing communication settings in TELARM
6.6.2.3 Communication Settings Uploading
To upload communication settings from the device, make sure that TELARM connection is established.
Mark modified settings as “Approved” in TELARM.
To approve settings:
1) Right click on the submenu “Communication settings” in Database browser and choose “Mark as Ready”
(Figure 79);
2) Right click on the same submenu and choose “Mark as Approved”;
3) The green “V” sign will appear near the submenu after successful approval.
Approved communication settings can be uploaded to the device:
4) In “On-Line” menu click “Upload settings to the device…” (Figure 79);
5) The reading “Communication settings uploaded” will appear in the Connection log after successful
uploading if settings were uploaded via PCI. “Communication settings uploaded” will appear in Messages log
if settings were uploaded via TDI;