TAVRIDA ELECTRIC Rec15/25 Al1 5p, User Manual, Page: 72 / 136

72
Figure 73
Downloading protection settings via TELARM
6.6.1.2 Protection Settings Modification
Protection settings can be changed locally (via the MMI or the PCI) or remotely via the TDI interface.
Protection settings modifications using the MMI:
Main menu -> Settings -> Protection -> Group #
Protection settings can be changed in each protection group independently.
NOTE! To apply updated settings it is required to upload them to the controller. Uploading settings is
de
scribed in “Uploading protection settings”.
To edit protection locally (PCI) the following actions should be performed:
1) Open the model in the database where settings shall be changed (Figure 74)
2) Double click on “Group 1” submenu (or other protection settings group) of the model
Database browser -> Model -> Protection settings -> Group 1
3) “Protection settings” window will popup
After “Protection settings window Group 1” (or other protection settings group) appears it is possible to:
1) Change protection settings;
2) For your convenience you may hide or show protection element settings by using “+” and “–“ buttons. You
may plot the TCC curve of the protection element by pushing the TCC button (Figure 74).