TAVRIDA ELECTRIC Rec15/25 Al1 5p, User Manual, Page: 23 / 136

23
Table 8
– Input/Output Module (IOM) parameters
Digital inputs Value
Rated voltages of signal applied to digital inputs
- for IOM-04
- for IOM-03 12/24/30/48/60 V DC
110/125/220 V DC
Pickup voltage of signal applied to digital inputs
- for IOM-04
- for IOM-03 Above 7 V
Above 100 V
Reset voltage
- for IOM-04
- for IOM-03 Below 3 V
Below 30 V
Maximum continuous voltage of signal applied to digital inputs
- for IOM-04
- for IOM-03 75 V
275 V
Input resistance
- for IOM-04
- for IOM-03 3 kOhm
125 kOhm
Recognition time, ms - not more 20
Reset time, ms - not more 20
Digital outputs Value
Rated voltage 250 V AC
Rated current 16 A
Breaking capacity DC1 (at L/R=1ms): 30/110/220 V 16/0.3/0.12 A
Minimum switching load 500 mW (10V/5mA)
Table 9
– Wired Ethernet module (ETH) parameters
Parameter Value
Applicable standard
USB 1.2 (according to RC5 specification)
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-T
IEEE 802.3x Flow Control
Interface RJ-45 10/100 Ethernet port
Maximum receive / transmit speed Up to 70 Mbps (full duplex mode)
Dimensions 60.2 x 50 x 37.6 mm
Net weight, not more 25 g
Power consumptions 1.0 W (max)
Operation temperature -
40…+85 °C
Table 10
– Optical Ethernet module (ETH) parameters
Parameter Value
Applicable standard
USB 1.2 (according to RC5 specification)
IEE802.3u 100Base-FX
IEC 9314-3: 1990
ANSI X3.166-1990
Interface SC/ST
Maximum receive / transmit speed 100
–125 Mbps (full duplex mode)
Dimensions 132 x 71 x 39 mm
Net weight, not more 115 g
Power consumptions 1.0 W (max)
Operation temperature -
40…+85 °C
Table 11
– Bluetooth module (BTM) parameters
Parameter Value
Bluetooth version 2.0
Frequency
2402 … 2485 MHz
Channel intervals 1 MHz
Operation radius 10 m
Operation mode Slave
Profile Serial port
Tx Power +6 dBm