TFCB430.01.01
Chin-up Bar
Operating Instructions
Assembly
Before assembly, take a close look at the individual assembly steps shown
and carry out the assembly in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly.
Tighten the screws using the tool only when you are instructed to do
so.
A Round screw
B Hex Screw
C Nut
D Washer
1. Connect part 1 and part 2.
2. Fasten part 3 and 4 to part 1 and 2 with four hex screws (B), four
washers (D) and four nuts (C).
3. Fasten part 5 to part 3 and 4 with two round screws (A), two washers
(D) and two nuts (C).
Specification
The Taurus chin-up bar is a small piece of fitness equipment that makes it
easy for you to achieve a well-toned upper body. The chin-up bar or door
bar can simply be hung in the door frame for chin-up training or placed
on the floor to do e.g. push-ups or dips. With these few easy-to-perform
exercises, you can effectively train almost all the muscles of your upper
body.
In addition to its versatility, the Taurus pull-up bar impresses with its
stability and high-quality workmanship. The pull-up bar can be loaded
with up to 100 kg (please note that this value applies to the Taurus pull-up
bar and not to the door frame). The support surfaces on the wall and in the
door frame are specially padded so that no pressure points occur.
Technical Data
Min. and max. width of door frame 81 - 96 cm
Max. depth of door frame approx. 15 cm
Max. load approx. 100 kg
The Taurus chin-up bar with different grip widths:
+
Narrow pull-up grip: 15 cm distance
+
Parallel grip: 45 cm distance
+
Wide parallel grip: 75 cm
Art. No. TF-CB-430
