Taurus RX7 Assembly And Operating Instructions Manual Download Page 47

Page: 47 / 68

RX7

3.5.7

ANGLE OF THE INFRARED TRANSMITTER FROM THE HANDLE

3.5.8

Code from the remote control

The code from the remote control (or RMC code in short) allows you to reprogram the code from the

infrared remote control. There are two reasons to reprogram the RMC code:

1. There are several rowing machines with remote controls nearby and the infrared rays overlap. This

may be the case at health clubs and commercial facilities.

2. Disruption with existing infrared signals, for example, television or TV remote control, etc. This

happens primarily with home use.

ड

ATTENTION

Do not reprogram the RMC code as long as it is not necessary, because the infrared remote

control may stop working if you make a mistake.

Step 1

1. Place the handle in the handle holder and

avoid touching the handle again until

step 3

In the figure the infrared

transmitter of the

handle points upwards

and downwards, so it

does not point towards

the infrared receiver of

the computer.

Wrong

Right

In the figure the infrared

transmitter of the handle

points directly towards

the infrared receiver of

the computer.

Handlebar

holder

Summary of Contents for RX7





































































Search results

Summary of Contents for RX7

Reviews:

Related manuals for RX7

Brands by name

Popular brands

Taurus RX7, Assembly And Operating Instructions Manual

Search results

Summary of Contents for RX7

Reviews:

Related manuals for RX7

Brands by name

Popular brands