Taurus 903907000, Manual

Page: 18 / 120

- The pilot light (D) will come on to indicated that the charger is
charging the battery
- Approximately 8 hours are needed for a complete charger of the
battery. Never attempt to overcharge the battery (although it is
recommended that the first charge of the battery be of 16 hours in
duration).
- When the battery is charged disconnect the charger from the mains
supply.
- NB: Do not use the appliance while it is connected to the charger.
Instructions for use:
Before use:
- Make sure that all the product’s packaging has been removed
- Before use this product for the first
Insertion of a comb guide:
- Hold the guide comb by the two sides, insert the head into the
guides and slide downward until it is coupled (Fig. 1)
- Use the comb size selector (F) to adjust the height of the cut.
- To extract the comb guide, adjust to the maximum height and pull
out.
Use:
- Turn the appliance on, by using the on/off switch
- Select the desired cutting height using the comb height selector (F)
To trim:
- Attach the comb guide E to the appliance by pressing until it fits
into its position with the teeth facing downwards.
- Cut the hair moving the appliance in the opposite direction of the
natural growth of the hair.
- Always ensure that teeth of the comb guide are pointing in the
direction in which the appliance is moving.