TATUM UTV C-110S, Assembly/Installation Instructions

Page: 1 / 4

ASSEMBLY/INSTALL INSTRUCTIONS
Can-Am X3 Bulkhead Gusset Kit
PART #: C-110S, C-110S-RAW
Your package should come with the following:
(6) 4130 Gusset Kit Pieces
M12
(6) M12-1.75 x 90MM 12-POINT FLANGE BOLT
(12) M12 DIN 125A FLAT WASHER
(6) M12-1.75 NYLON INSERT LOCKNUT
M10
(2) M10-1.5 X 25MM 12-POINT FLANGE BOLT
(2) M10 DIN 125A FLAT WASHER
(2) M10-1.5 NYLON INSERT LOCKNUT
M8
(6) M8-1.25 X 25MM 12-POINT FLANGE BOLT
(6) M8 DIN 125A FLAT WASHER
(6) M8-1.25 NYLON INSERT LOCKNUT
Tools/Hardware Needed:
•
T20
•
T30
•
Jack
•
10mm socket
•
10mm wrench
•
12mm socket
•
12mm wrench
•
18mm socket
•
18mm wrench
•
21mm wrench
•
5/16” drill bit
•
Drill
•
Ratchet/Impact