VERTICAL TOWED MIXER - TWO AUGERS
VD SERIES
Tatoma Ag Equipments Corp. Located in Colcord, OK. Phone (918) 422-4271
- 63 -
LONG TERM STOP OF THE MIXER
In case of prolonged stop of the mixer:
1. Park the mixer on level ground far from gutters, ditches, slopes or culverts, where it
does not pose an obstacle to the traffic of people or machinery.
2. Check that there are no powered services, augers, and unloading conveyors, etc.
3. Stop the tractor and remove the keys. During the parking process, keep in mind the
following recommendation:
The mixer operator shall have the keys of the tractor towing it in
his possession while performing any operation on the mixer.
4. Put the chocks or apply the parking handbrake.
5. Remove the mixer control from the tractor cab and leave it in its support plate.
6. Disconnect the electrical, hydraulic and service brake connections.
7. Uncouple the PTO from the tractor and leave it resting on the mixer
8. Fold down the support jack and drive it to the ground so that the mixer can be easily
disengaged from the tractor.
9. Unhook the mixer from the tractor.
Handle the coupling elements of the mixer and the tractor with
work gloves.
To restart the mixer, follow the steps and safety recommendations indicated in the
“START
-
UP” section of this owner’s
manual.
