manualshive.com logo in svg

TATA Motors Punch 2021, Owner'S Manual

Share
Download
TATA Motors Punch 2021 Owner'S Manual Download Page 83

AUDIO REMINDERS (as available) 

Key-in Reminder/audio Warning 

If you forget the key inside the vehicle 
when you leave the ignition in ‘OFF’ posi-
tion, an audio warning will sound. Remove 
key to stop the warning. 

If no key is detected in the vehicle  

If the vehicle is in ACC ON/IGN ON and 
the customer takes the smart key out of 
the vehicle and closes the last door, an 
audio warning will be sounded for nine 
times to alert that the key is not in the ve-
hicle. 

 

 

Parking Lamp ‘ON’ Reminder 

If you forget to turn OFF the park lamp, an 
audio warning will be started.  Switched 
OFF the park lamps to stop the warning.

 

 

Parking Brake ‘ON’ Reminder 

If Park Brake is applied and vehicle is 
driven, Telltale will turn ‘ON’ and buzzer 
will provide audio warning continuously. 
Disengage the park brake to stop audio 
warning. 

Reverse Gear Reminder 

If reverse gear is engaged, the buzzer 
sound will alert you. 

Driver Seat Belt Reminder 

If seatbelt is not fastened and vehicle goes 
above 15 kmph, then final audio warning 
will go on for 90 seconds. Seat belt tell-tale 
light will blicks when audio alarm is active. 

Front Passenger Seat Belt Re-minder 

If front passenger has not fastened seat-
belt and if vehicle speed goes above 15 
kmph, then final audio warning will go on 
for 90 seconds. Seat belt tell-tale light will 

blicks when audio alarm is active. 

 

 

Door Open Reminder 

If any door is open and the user tries to 
lock the vehicle, one flash with a beep 
sound will indicate that a door is open. 

Engine Coolant Temperature High 
Chime 

The engine coolant temperature tell-tale 
warning light along with an audio warning 
will alert the driver if the coolant tempera-
ture is high. 

Speed Limit Chime 

When speed of the vehicle is greater than 
80 kmph, an audio warning will sound at 
periodic interval of 120 seconds. 

When vehicle speed crosses 120 kmph, 
continuous audio warning (beeps) will 
sound. 

Drive Mode Chime 

When user switches drive mode from city 

 NOTE

In this condition customer needs to 
bring the smart key inside the  vehicle.

 NOTE

Do not forget to turn OFF your park 
lamp as it may drain the vehicle’s bat-
tery.

 NOTE

Fasten the seatbelt to stop audio warn-
ing.

DASHBOARD AND FEATURES

75

Summary of Contents for Punch 2021















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands