manualshive.com logo in svg

TATA Motors Punch 2021, Owner'S Manual

Share
Download
TATA Motors Punch 2021 Owner'S Manual Download Page 122

114

REAR VIEW MIRRORS 

Inside Rear View Mirror (IRVM) 

To adjust the mirror move the mirror up, 
down or sideways manually to obtain the 
best rear view. 

When you drive at night, set the selector 
tab to select anti-glare mode (if available) 
to reduce glare from the headlights of ve-
hicles behind you. 

 

 

Outer Rear View Mirrors (ORVM) 

You can adjust the outer rear view mirrors 
manually (By hand) or remotely by knob. 
Adjust the outside rear view mirrors to de-
sired position. 

 

 

Motorized ORVM Adjustment (if avail-
able) 

 

The switch to adjust the motorized mirrors 
is located on the driver’s door. You can ad-
just the mirrors when the ignition switch is 
in the “ACC” or “ON” position. 

To Adjust The Mirrors: 

Move the mirror selection switch to L 

1.

(for left side) and R (for right side) to 
select the mirror you wish to ad-just. 

Use the four positions of the knob to 

2.

adjust the rear view mirrors to required 
position. 

 NOTE

Use antiglare position only when neces-
sary, as it reduces rear view clarity.

 NOTE

Objects visible in mirror are actually 
closer than they appear. Always make 
sure of the actual distance from the 
road users traveling behind by glancing 
over your shoulder.

STARTING AND DRIVING

Summary of Contents for Punch 2021















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands