TATA Motors NEXON EV, Owner'S Manual

Page: 98 / 232

90
iii) Low Beam
Rotate stalk to turn
‘ON’ the Low Beam function.
Lane Change Signal
To signal a lane change, move the lever
slightly up or down to the point where the
turn signal light begins to flash, but the
lever does not latch. The turn signal will
flash 3 times automatically.
Head Lamp Leveling Rotary Switch
Inner rotary switch on right hand stalk is
provided for head lamp leveling. With the
inner rotary switch, Head lamp leveling
can be done with head lamp in Low Beam
and in ‘ON’ position. Select correct posi-
tion before start of trip and vehicle is sta-
tionary. Depending upon the number of
passengers and luggage in the vehicle
headlamp focus may change. This can be
adjusted by rotating the knob to one of the
4 level positions. COMBI-SWITCH (LH Stalk)
0. Off’ Position
The wiper is switched ‘OFF’.
1. Intermittent Wipe
Push the stalk upwards to oper-
ate intermittent wipe.
Inner rotary switch on left hand
stalk is provided for intermittent front wiper
delay. The switch has 5 delay timers.
2. Slow Wipe
Push the stalk towards position (2) for con-
tinuous slow wipe.
DASHBOARD AND FEATURES