TATA Motors NEXON EV, Owner'S Manual

Page: 97 / 232

Gear Selection Knob Failure Behav-
ior
The rotary knob will turn on all function ON
Indication LEDs. Please contact TATA Mo-
tors EV service centre.
COMBI-SWITCH (RH Stalk)
Left Turn Signal
Move the lever fully upward.
Right Turn Signal
Move the lever fully downward.
High Beam
Move the lever forward to select the High
Beam function.
Pull the lever back to normal for low beam.
High Beam Flash (spring Return)
To flash the high beam, pull the lever to-
wards you from the normal position. It will
return to its normal position when you re-
lease it.
Headlamp Rotary Switch
i) OFF Position
All lamps will remain
‘OFF’.
ii) Parking Lamp
Rotate stalk to turn ‘ON’
the Parking lamps.
NOTE
The images provided are for reference
purpose only.
NOTE
When the turn is completed, the signal
will cancel and the lever will return to its
normal position.
NOTE
DRL (if equipped) will turn ‘ON’ as long
as parking lamp input is ‘OFF’ and IGN
is ON.
To temporarily deactivate DRL turn ‘ON’
and ‘OFF’ the park lamp switch two
times within 3 seconds. The lamp can
be activated again by performing the
same action.
DASHBOARD AND FEATURES
89