Tasman Networks 1002, Installation Manual

Page: 20 / 78

1004
1004 Front Panel
The router front panel houses the system LEDs.
The following section identifies and describes the 1004 router network ports and LEDs.
Figure 3 1004 Router Front Panel
1004 Back Panel
The 1004 router back panel provides connections for four WAN ports, two 10/100 Base-T
Ethernet ports, one AUX port, one Console port, and a 12 VDC power input jack.
Figure 4 1004 Router Back Panel
LEDs
The 1004 front-panel LEDs indicate real-time unit status. Table 6provides information about
how to interpret the LED states.
WAN Port
LEDs 1-4
Ethernet 0 LEDs Ethernet 1 LEDs
Power LED
LINK/ACT HS
DUP LINK/ACT HS
DUP
WAN Ports 1 - 4 Fast Ethernet
Port 0 Fast Ethernet
Port 1 AUX Port Console
Port 12 VDC
Input Jack
Table 6 LED Descriptions
Port Description Color
WAN STATUS 1-4 Indicates traffic activity on
this interface
Green = normal activity
Red = alarm state
Yellow = test mode
ETHERNET 0/1
LINK/ACT Indicates traffic activity on
this interface Green = link is operational
Blinking Yellow = either receiving or sending
traffic
Red = packet collisions