Options
Target adaptation
The Emulation Adapter adaptation to a specific target microcontroller pincount and package is
done via a Conversion board and a Solder part. Conversion boards connect between the Emula-
tion Adapter and the matching Solder part, which is being soldered on the embedded target
side. Available Conversion boards and Solder parts are listed in the table below.
Package (Pitch)
Conversion board
(Ordering code)
Type
Solder part
(Ordering code)
QFP48 (0.5 mm)
IEA-S32K148-TQ48
Fixed
IA48TQ-SOLDER
QFP64 (0.5 mm)
IEA-S32K148-ATQ64
IA64ATQ-SOLDER
QFP100 (0.5 mm)
IEA-S32K148-TQ100
IA100TQ-SOLDER
QFP144 (0.5 mm)
IEA-S32K148-TQ144
IA144TQ-SOLDER
QFP Fixed Adaptation
The adaptation is elivered with a slot screw, which can be used to achieve a more solid and
stable fixing of the Conversion board and the Solder part.
Conversion board
Solder part
