Taski swingo 455B Technical Manual Download

Page: 77 / 103

GTS

Technical Manual

5. March 2013

Edition: V1.10/2013

6-2

0.10

yst

em a

tec

- 3

50B_

455B_

V1.

00.f

Picture 2: System overview 455B

6.1.3

Start up/Self holding

The machine is switched ON by pressing the ON/OFF button for 3 seconds and feeds the

power electronics with power. The power electronics get power and it enables the proc-

essor to start and go into the self holding. The power electronics stays on as long as:

•

It is not switched OFF by the ON/OFF button.

•

The switch-off timer does not reach 5 minutes.

•

The charger is not connected to main.

•

The battery plug is connected to jack housing (350B:05/108,

455B:02/135).

6.1.4

Emergency loop

The machine has a separate emergency loop, which contains following elements:

•

Charger (internal switch).

•

Start up/Self holding.

Summary of Contents for swingo 455B





























































































Search results

Summary of Contents for swingo 455B

Reviews:

Related manuals for swingo 455B

Brands by name

Popular brands

Taski swingo 455B, Technical Manual

Search results

Summary of Contents for swingo 455B

Reviews:

Related manuals for swingo 455B

Brands by name

Popular brands