manualshive.com logo in svg

Taski swingo 350B, Technical Manual, Page: 52 / 103

Share
Download
Taski swingo 350B Technical Manual Download Page 52

GTS

Technical Manual

26. March 2013

Edition: V2.00/2013

5-29

Copyright © 2013, Diversey Inc.

05.

44.1

0 b

ase

 - 

pu

mp

 -

 35

0B_

V1.0

0.fm

5.4

Base

5.4.1

Removing of pump

Picture 44: Pump

•

Remove clear water tank assembly according to chapter 

REMOVING OF CLEAR WATER TANK ASSEMBLY.

Ensure that no water is in the fresh water system before you 

disconnect the hoses.

•

Disconnect the fresh water hoses.

Remarks

To get better access to the wiring you can remove the charger (05/

101). Just pull the charger towards you as it is only mounted on slides 

without any fixation screw.

•

Remove the front pump holder (05/103) to get better access.

•

Tread out the pump (05/104) of the pump holder (05/103).

•

Remove pump.

•

Disconnect wires at the plugs near the connection block (05/

132), situated in the wiring harness.

To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com

Summary of Contents for swingo 350B








































































































Reviews:

No comments