Taski procarpet 30, Instructions Of Use

Page: 76 / 369

74
Cleaning methods
Spray extraction
Spray extraction
Cleaning of a fabric cover with water jet from the spray nozzle
and simultaneous vacuuming of the dirty water. The fabric
cover is free from soiling on the surface and in the deeper lay
-
ers of the carpet pile; long drying time.
Indirect method:
First spray cleaning solution, leave to soak, rinse with fresh
water in the second step and simultaneously vacuum the wa
-
ter off.
Direct method:
Spray extraction with cleaning solution in one combined step.
Encapsulation
Encapsulation
Cleaning of a fabric cover by applying a cleaning solution and
brushing it in. Drying binds the dirt which can then be removed
with a vacuum cleaner with a brush.
Beginning work with the machine
Cleaning start
Working methods
Notice:
The cleaning method is described in detail
in the "Methods Card”.
Please contact your TASKI customer con
-
sultant for further details.
Notice:
The black brush must be used for the
cleaning method spray extraction.
Notice:
The white brush must be used for the
cleaning method encapsulation.
Notice:
The hand tool can not be used for the
cleaning method encapsulation.
Notice:
The filter of the fresh water tank must be
cleaned after every use, see page 77.
Notice:
Please familiarize yourself with the proper
-
ties of the carpet before you start cleaning.
Incorrect use of the machine and the
cleaning product may result in damage to
the carpet.
Attention:
Always wear slip-resistant shoes and ap
-
propriate working clothes when working
with this device!
• Move the foot pedal forward into the
working position.
This lowers the suction nozzle and
the brush.
• Insert the plug into the mains socket.
• Switch on the machine (main switch).
• Set the desired function.
• I = Encapsulation (water, brush and
cleaning product)
• 0 = Work in (brush only)
• II = Spray extraction (water, brush
and suction motor)
Notice:
Hold the power supply cord in your hand.
Ensure that the main cord cannot come
into contact with the tool.
• Press the operating lever.
The brushes will thereby be set into
motion.
Notice:
The cleaning method is described in detail
in the ”Methods Card”.
Please contact your TASKI customer con
-
sultant for further details.