Taski procarpet 30, Instructions Of Use, Page: 75 / 369

73
Filling the fresh water tank
Dosing
Adjusting brush height
• 1 = low-pile carpet, low brush position
• 4 = deep-pile carpet, high brush position
Control panel
Prepare carpet
Application technique
Attention:
Max. permissible water temperature
60 °C/140 °F.
Diversey recommends using cold water
since hot water will adjust to the floor tem
-
perature as soon as it is in contact with the
floor. Thus there are no advantages to us
-
ing hot water.
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han
-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Caution:
Using unsuitable products (e.g. products
containing chlorine, acids or solvents) may
cause harm to health and severe damage
to the machine.
max.60
°
C
max.140
°
F
Attention:
The position of the brush must be adjusted
to the carpet pile.
Incorrect setting may damage the carpet.
I: Water, brush and cleaning agent (encapsulation)
(white brush)
0: Brush only (rubbing into carpet)
II: Water, brush and suction motor (spray extraction)
(black brush)
Notice:
Vacuum the carpet before working with the
carpet cleaning machine.
For visible stains, treat the carpet with a
TASKI stain remover. Please contact your
Diversey service partner for help.
Machine
Intermediate cleaning (encapsulation) Yes
Base cleaning (spray extraction) Yes
Wet shampooing no
Shampoo dry no
1
2
3
4
+
EN