manualshive.com logo in svg

TASKalfa TASKalfa 4002i, Operation Manual

The TASKalfa 4002i is a high-quality multifunctional device, equipped with cutting-edge features for efficient document management. Unlock its full potential with the detailed and user-friendly Operation Manual, available for free download from our website. Discover how to optimize your workflow and maximize productivity effortlessly.

Share
Download
background image

1-8

Legal and Safety Information > Notice

Warranty (the United States and Canada)

4002i/5002i/6002i

MULTIFUNCTIONAL PRODUCT LIMITED WARRANTY

KYOCERA Document Solutions America, Inc. and KYOCERA Document Solutions Canada, Ltd. 
(both referred to as "KYOCERA") warrant the Customer's new Multifunctional Product (referred to 
as "MFP"), and the new accessories installed with the initial installation of the MFP, against any 
defects in material and workmanship for a period of one year, or 600,000 copies/prints from date of 
installation, whichever first occurs. In the event the MFP or an accessory is found to be defective 
within the warranty period, KYOCERA's only obligation and the Customer's exclusive remedy shall 
be replacement of any defective parts. KYOCERA shall have no obligation to furnish labor. 

This warranty covers Maintenance Kits and the components of Maintenance Kits included with the 
original MFP for a period of one year or 600,000 copies/prints, whichever first occurs. Maintenance 
Kits consist of the developing unit, the drum unit, the transfer belt, and the fixing unit. Replacement 
Maintenance Kits have a 90 day Limited Warranty. 

This warranty is valid only for the original retail purchaser (referred to as the "Customer") of a new 
KYOCERA MFP in the United States of America or Canada, based upon the country of purchase. 

In order to obtain performance of this warranty, the Customer must immediately notify the 
Authorized KYOCERA Dealer from whom the product was purchased. If the KYOCERA Dealer is 
not able to provide service, write to KYOCERA at the address below for the name and address of 
the Authorized KYOCERA Dealer in your area, or check KYOCERA's website at 
www.kyoceradocumentsolutions.com for KYOCERA Document Solutions America, Inc. or 
www.kyoceradocumentsolutions.ca for KYOCERA Document Solutions Canada, Ltd. 

This warranty does not cover MFPs or accessories which: (a) have become damaged due to 
operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress, 

(b) have used parts or supplies which are not genuine KYOCERA brand parts or supplies, (c) have 
been installed or serviced by a technician not employed by KYOCERA or an Authorized KYOCERA 
Dealer, or (d) have had the serial number modified, altered, or removed. 

This warranty gives the Customer specific legal rights. The Customer may also have other rights, 
which vary from state to state, or province to province. Neither the seller, nor any other person, is 
authorized to extend the time period or expand this warranty on behalf of KYOCERA. 

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, 
EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED 
WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE. THIS WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE 
LIABLE FOR, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF 
THE USE OF, OR INABILITY TO USE, THE MFP. 

KYOCERA Document Solutions Canada, Ltd. 

6120 Kestrel Rd., Mississauga, ON L5T 1S8,   
Canada 

KYOCERA Document Solutions America, Inc. 

225 Sand Road,  
Fairfield, New Jersey 07004-0008, USA 

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for TASKalfa 4002i

Canon MX490 Series Setup Manual preview
MX490 Series
Brand: Canon Pages: 11
Canon MX490 Series Quick Help Manual preview
MX490 Series
Brand: Canon Pages: 2
Canon Photura 135 Review preview
Photura 135
Brand: Canon Pages: 12
Canon PIXMA Pro9000 Mark II Series Release Note preview
PIXMA Pro9000 Mark II Series
Brand: Canon Pages: 4
Samsung CLP 510N - Color Laser Printer Manual Del Usuario preview
CLP 510N - Color Laser Printer
Brand: Samsung Pages: 270
Samsung Bixolon SRP-270 Integrator'S Manual preview
Bixolon SRP-270
Brand: Samsung Pages: 13
YOUPAI MAX Product Instruction Manual preview
MAX
Brand: YOUPAI Pages: 15
TallyGenicom 5040 Quick Start Manual preview
5040
Brand: TallyGenicom Pages: 15
Xerox 4215 Operator'S Manual preview
4215
Brand: Xerox Pages: 414
DataSouth Documax A6300 Series User Manual preview
Documax A6300 Series
Brand: DataSouth Pages: 180
Pantum P2800DW Series User Manual preview
P2800DW Series
Brand: Pantum Pages: 111
Ricoh PRO C7200S Operator'S Manual preview
PRO C7200S
Brand: Ricoh Pages: 552
Xerox Phaser 7400 Service Manual preview
Phaser 7400
Brand: Xerox Pages: 109
Paradise POS Star SP700 User Manual preview
Star SP700
Brand: Paradise POS Pages: 275
Intellisystem ThermalTronix TT-1025EX-MIL User Manual preview
ThermalTronix TT-1025EX-MIL
Brand: Intellisystem Pages: 11
Triumph Adler 5057i Quick Manual preview
5057i
Brand: Triumph Adler Pages: 4
Lexmark X5495 Specifications preview
X5495
Brand: Lexmark Pages: 2
Epson C11C501061 - Stylus Photo 900 Color Inkjet Printer Product Information Manual preview
C11C501061 - Stylus Photo 900 Color Inkjet Printer
Brand: Epson Pages: 15

Brands by name

Popular brands

Load more brands