TASKalfa TASKalfa 4002i Page 481 Operation Manual Download

Page: 481 / 662

9-36

User Authentication and Accounting (User Login, Job Accounting) > Job Accounting (Local)

Job Accounting (Local)

You can add, change and delete an account and set the restriction for each account.

Adding an Account

Up to 1000 individual accounts can be added. The following entries are required.

Display the screen.

[

System Menu/Counter

] key > [

User Login/Job Accounting

]

"Job Accounting Settings" [

Next

] > "Job Accounting (Local)" [

Next

] > "Accounting List"

[

Add/Edit

] > [

Add

]

Enter the account information.

"Account Name" [

Change

] > Enter the account name > [

]

"Account ID" [

Change

] > Enter the account ID > [

]

Activate or deactivate restriction.

Item

Descriptions

Account Name

Enter the account name (up to 32 characters).

Account ID

Enter the account ID as many as eight digits (between 0 and 99999999).

Restriction

This prohibits printing/scanning or restricts the number of sheets to load.

Restricting the Use of the Machine (page 9-38)

NOTE

If the login user name entry screen appears during operations, enter a login user name
and password, and select [

Login

]. For this, you need to login with administrator privileges.

The factory default login user name and login password are set as shown below.

NOTE

For details on entering characters, refer to the following:

Character Entry Method (page 11-10)

NOTE

Any "Account ID" that has already registered cannot be used. Enter any other account ID.

Restricting the Use of the Machine (page 9-38)

Model Name

Login User Name

Login Password

TASKalfa 4002i

4000

TASKalfa 5002i

5000

TASKalfa 6002i

6000

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands

TASKalfa TASKalfa 4002i, Operation Manual

Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands