TASKalfa TASKalfa 4002i Page 414 Operation Manual Download

Page: 414 / 662

8-44

Setup and Registration (System Menu) > System Menu

Sending Log History

[

System Menu/Counter

] key > [

Report

] > [

Sending Log History

]

Login History Settings

[

System Menu/Counter

] key > [

Report

] > [

Login History Settings

]

Item

Description

Auto Sending

This function automatically sends the log history to the specified destinations
whenever a set number of jobs has been logged.

Value

: Off, On

NOTE

If [

] is selected, specify the number of job histories. The setting range is 1 to 1,500.

Send Log History

You can also send the log history to the specified destinations manually.

Destination

Set the destination to which log histories are sent. Only E-mail address can be set.

Job Log Subject

Set the subject automatically entered when sending log histories by E-mail.

Value

: Up to 60 characters

SSFC Log Subject

Enter the subject of the printed job history with IC card authentication.

Value

: Up to 60 characters

Personal Information

Select whether to include personal information in the job log.

Value

: Include, Exclude

Item

Description

Login History

Select whether to record the Login History.

Value

: Off, On

NOTE

If [

] is selected, set the number of histories to be recorded. The setting range is 1

to 1,000.

Auto Sending

Select whether the login history is automatically sent to the set address when the
number of entries reaches the number set in "Login History".

Value

: Off, On

NOTE

This function is displayed when "Login History" is set to [

Destination

Set the destination to which login histories are sent. E-mail address only can be set as
destination.

NOTE

This function is displayed when "Login History" is set to [

Subject

Set the subject automatically entered when sending login histories by E-mail.

Value

: Up to 60 characters

NOTE

This function is displayed when "Login History" is set to [

Log Reset

Resets the recorded login histories.

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands

TASKalfa TASKalfa 4002i, Operation Manual

Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands