TASKalfa TASKalfa 4002i Page 238 Operation Manual Download

Page: 238 / 662

5-32

Operation on the Machine > WSD Scan

WSD Scan

WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.

When transmitting using wireless LAN, select the interface dedicated to the send function in advance.

Primary Network (Client) (page 8-62)

Installing the Driver

For Windows 8, Windows 8.1 and Microsoft Windows Server 2012

Click [Search] in charms, [Control Panel], and then [View

devices and printers].

Install the driver.

Click [

Add a device

]. Select the machine's icon and then click [

Next

When the machine's icon is displayed in "

Printers

" on the [

Devices and Printers

] screen, the

installation is completed.

For Windows 7

Display [Network] in the Start menu.

Click [

Start

] button on the Windows and then select [

Network

NOTE

• To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-connected, and

"WSD Scan" is set to [

] in the network settings.

WSD Scan (page 8-55)

• For information on operating the computer, refer to the computer's help or the operation guide of your software.

NOTE

When [

Network

] does not appear in the Start menu, perform the following procedure.

Right-click [

Start

] and click [

Property

] in the menu that appears.

Select the [

[Start] menu

] tab in the "

Task bar and [Start] menu properties

" screen, and

click [

Customize

When the "

Customize [Start] menu

" screen appears, select the "

Network

" check box

and click [

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands

TASKalfa TASKalfa 4002i, Operation Manual

Search results

Summary of Contents for TASKalfa 4002i

Reviews:

Related manuals for TASKalfa 4002i

Brands by name

Popular brands