manualshive.com logo in svg

TASKalfa TASKalfa 4002i, Operation Manual

Share
Download
TASKalfa TASKalfa 4002i Operation Manual Download Page 228

5-22

Operation on the Machine > Frequently-Used Sending Method

Frequently-Used Sending Method

This machine can send a scanned image as an attachment of an E-mail message or to a PC linked to the network. In 
order to do this, it is necessary to register the sender and destination (recipient) address on the network.

A network environment which enables the machine to connect to a mail server is required in order to send E-mail. It is 
recommended that a Local Area Network (LAN) be used to assist with transmission speed and security issues.

Follow the steps below for basic sending. The following four options are available.

• Send as E-mail (E-mail Addr Entry): Sends a scanned original image as an E-mail attachment.

Sending Document via E-mail (page 5-23)

• Send to Folder (SMB): Stores a scanned original image in a shared folder of any PC.

Sending Document to Desired Shared Folder on a Computer (Scan to PC) (page 5-24)

• Send to Folder (FTP): Stores a scanned original image in a folder of an FTP server.

Sending Document to Folder on an FTP Server (Scan to FTP) (page 5-27)

• Image Data Scanning with TWAIN / WIA: Scan the document using a TWAIN or WIA compatible application program. 

Scanning using TWAIN or WIA (page 5-29)

NOTE

• Different sending options can be specified in combination.

Sending to Different Types of Destinations (Multi Sending) (page 5-38)

• The fax function can be used on products equipped with fax capability. 

FAX Operation Guide

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands