TASKalfa TASKalfa 4002i Page 104 Operation Manual Download | Manualshive

Page: 104 / 662

background image

2-39

Installing and Setting up the Machine > Energy Saver Function

Energy Saver Function

If a certain period of time elapses after the machine is last used, the machine automatically enters Low Power Mode to
reduce power consumption. If a further period of time elapses without the machine being used, the machine
automatically enters Sleep Mode, which minimizes power consumption.

Low Power Mode

If the machine is not operated for a certain period of time, the energy saver indicator will light up and the screen will
become dark to reduce power consumption. This status is referred to as Low Power Mode.

"Low power." will be displayed on the screen.

The amount of time before entering Low Power Mode: 3 minutes (default setting).

If print data is received during Low Power Mode, the machine automatically wakes up and starts printing. Also when fax
data arrives while the machine is in Low Power Mode, the machine automatically wakes up and starts printing.

To resume, perform one of the following actions.

• Select any key on the operation panel.
• Touch the touch panel.
• Open the optional original cover or the optional document processor.
• Place originals in the optional document processor.

Recovery time from Low Power Mode is as follows.

• Within 15 seconds

Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly.

Sleep

To enter Sleep, select the [

Energy Saver

] key. Touch panel and all indicators on the operation panel will go out to save

a maximum amount of power except the Energy Saver indicator. This status is referred to as Sleep.

If print data is received during Sleep, the machine automatically wakes up and starts printing.
Also when fax data arrives while the machine is in Sleep, the machine automatically wakes up and starts printing.
To resume, perform the following actions.
• Select any key on the operation panel.
• Touch the touch panel.
• Place originals in the optional document processor.

Recovery time from Low Power Mode is as follows.

• Within 17 seconds
Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly.

NOTE

If the Low Power Timer is equal to the Sleep Timer, a Sleep mode is preceded.

Energy Saver indicator

«
...
102
103
104
105
106
...
»

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for TASKalfa 4002i

Brand: idp Pages: 88

Brand: Magicard Pages: 30

Brand: Magicard Pages: 35

MAGICARD ID Card Printer

Brand: Magicard Pages: 30

Brand: Magicard Pages: 6

Brand: Oki Pages: 222

Brand: Oki Pages: 4

Brand: Oki Pages: 160

Brand: Datamax Pages: 95

Mark II E-4205e

Brand: Datamax Pages: 72

Brand: GE Pages: 16

Brand: ABLE Pages: 42

VarioLink 2650cp

Brand: Oce Pages: 2

Brand: Epson Stylus Pages: 2

Brand: imagistics Pages: 230

3150 - Phaser B/W Laser Printer

Brand: Xerox Pages: 2

Brand: WOOSIM Pages: 27

Brand: Cisco Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands