TASKalfa 3011i Page 172 Operation Manual Download

Page: 172 / 610

3-29

Preparation before Use > Registering Destinations in the Address Book

Adding a Destination on One Touch Key (One Touch

Key)

Assign a new destination (contact or group) to an one touch key. A maximum of 1,000 destinations can be registered.

Display the screen.

[

System Menu/Counter

] key > [

Edit Destination

] > "One Touch Key" [

Add/Edit

]

Add One Touch Keys.

Select a One Touch Key number (0001 to 1000) for the destination > [

Add/Edit

]

Selecting [

No.

] or the Quick No. Search key on the numeric keypad enables direct entry of

a One Touch Key number.

Select a One Touch Key with no registered destination.

Select "Display Name" [

Change

Enter the One Touch Key name displayed in the send base screen > [

]

Select "Destination" [

Change

The Address Book appears.

NOTE

• Refer to the following for use of One Touch Key.

Specifying Destination (page 5-40)

• You can add One Touch keys and change their settings on Command Center RX.

Registering Destinations (page 2-69)

• If registering and editing of the One Touch Keys is restricted to administrators, you can edit the One Touch Keys by

logging in with administrator privileges.

Edit Restriction (page 8-67)

Command Center RX User Guide

NOTE

For the Quick No. Search key, refer to the following:

Using the Quick No. Search Key (page 2-24)

NOTE

Up to 24 characters can be entered.
Refer to the following for details on entering characters.

Character Entry Method (page 11-9)

Edit Destination - One Touch Key

Add a One Touch key.

Add/Edit

No.

Delete

Detail

1/50

0001

0002

0003

0004

0005

0006

0007

0008

0009

0010

0011

0012

0013

0014

0015

0016

0017

0018

0019

0020

AAA

BBB

CCC

m034701

Summary of Contents for 3011i



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3011i

Reviews:

Related manuals for 3011i

Brands by name

Popular brands

TASKalfa 3011i, Operation Manual

Search results

Summary of Contents for 3011i

Reviews:

Related manuals for 3011i

Brands by name

Popular brands