manualshive.com logo in svg

TASKalfa 3011i, Operation Manual

Share
Download
TASKalfa 3011i Operation Manual Download Page 130

2-65

Installing and Setting up the Machine > Command Center RX

2

Specify the host name.

Enter the device information, and then click [

Submit

].

E-mail Settings

By configuring the SMTP settings, it is possible to send the images scanned by the machine as E-mail attachments and 
to send E-mail notices when jobs have been completed.

To use this function, this machine must be connected to a mail server using the SMTP protocol.

In addition, configure the following.

• SMTP  settings

Item: "SMTP Protocol" and "SMTP Server Name" in "SMTP" 

• The sender address when the machine sends E-mails

Item: "Sender Address" in "E-mail Send Settings"

• The setting to limit the size of E-mails

Item: "E-mail Size Limit" in "E-mail Send Settings"

The procedure for specifying the SMTP settings is explained below.

1

Display the screen.

Display the SMTP Protocol screen.

1

Launch your Web browser.

2

In the address or location bar, enter the machine's IP address or the host name.

Click in the following order to check the machine's IP address and the host name.

[

Device Information

] in the home screen > [

Identification/Wired Network

]

3

Log in with administrator privileges.

The factory default setting for the default user with administrator privileges is shown below. 
(Upper case and lower case letters are distinguished (case sensitive).)

Login User Name: Admin
Login Password:

Admin

IMPORTANT

After changing the setting, restart the network or turn the machine OFF and then ON.
To restart the network interface card, click [Reset] in the [Management Settings] 
menu, and then click [Restart Network] in "Restart".

Summary of Contents for 3011i



































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands