INSTRUCTIONS
1. To load with grease first unscrew the barrel from the handle/trigger unit.
2. There are two options to load the grease.
3. Loading from tub of grease (as fig. 4).
4. Using a grease cartridge (as fig. 5).
a. If you've got a new tub of grease with a large plastic washer in
b. The other method is with a grease cartridge (as fig. 3).
(as Fig. 2), then you can load directly from the tub.
(See step 4 below)
a. With the barrel off the gun, line up with the opening in the middle
b. Once you've got the opening in the barrel over the opening in the
c. As you push down on the barrel and pull up on the plunger the
of the washer in the tub of grease.
a. Remove the plastic cap from the end of grease cartridge and insert it
(open end first) into the barrel. Be careful when removing the metal
lid that no metal slivers are introduced into the grease.
tub of grease, push down on the barrel and pull up on the plunger
b. Push the grease cartridge all the way into the barrel. Remove the metal
c. Fill the handle/trigger unit with grease and screw it back onto the barrel.
d. Pump the handle to get grease coming out of the injector end. You might
need to adjust the tab that holds the plunger from pushing back in or give
the end of the injector a push to allow the pumping to happen smoothly.
lid seal.
at the same time.
d. Pump the handle to get grease coming out of the injector end. You might
need to adjust the tab that holds the plunger from pushing back in or give
the end of the injector a push to allow the pumping to happen smoothly.
d. When the gun is full of grease, move the barrel sideways to cut off
e. Fill the handle/trigger unit with grease and screw it back onto the barrel.
the pillar of grease you've made inside the barrel.
grease is pulled in to the gun.
Fig. 3
Fig. 5
Fig. 2
Grease Cartridge
5. Pump the lever handle several times until grease flows from the coupler.
A
Fig. 4
A
A
3
