Task Force Tips Ultimatic Instructions For Installation, Operation And Maintenance Download Page 1

©Copyright Task Force Tips LLC 2012-2021

1

LIB-065 February 22, 2021 Rev02

TASK FORCE TIPS LLC

MADE IN USA · tft.com 

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION, AND MAINTENANCE

INSTRUCTIONS FOR INSTALLATION, OPERATION, AND MAINTENANCE

 

Ultimatic

®

 ER Nozzles 

WARNING

Understand  manual  before  use.  Operation  of  this  device  without  understanding  the  manual  and

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/serial-

number. 
This equipment is intended for use by trained and qualified emergency services personnel for

firefighting. All personnel using this equipment shall have completed a course of education

approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the

operation, servicing, and safety procedures associated with this product. This manual should be

kept available to all operating and maintenance personnel. 

Summary of Contents for Ultimatic









Reviews: