background image

©Copyright Task Force Tips LLC  2002-2020 

LIX-512 August 17, 2020 Rev09

Manually Operated Extend-A-Gun

Model XG12

Telescoping Waterway for Deck Mounted Monitors

INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION, AND MAINTENANCE

DANGER

Understand manual before use. Operation of this device without understanding the manual and 

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/ 

serial-number

This equipment is intended for use by trained and qualified emergency services personnel for 

firefighting. All  personnel  using  this  equipment  shall  have  completed  a  course  of  education 

approved by the Authority Having Jurisdiction (AHJ).

This instruction manual is intended to familiarize firefighters and maintenance personnel with 

the operation, servicing, and safety procedures associated with this product. This manual 

should be kept available to all operating and maintenance personnel.

TASK FORCE TIPS LLC

MADE IN USA • TFT.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

3" NPT

EXTENDED

SHOWN WITH TFT MASTER NOZZLE

AND CROSSFIRE DECK GUN

RETRACTED

INTEGRAL

CROSSFIRE

OUTLET

** 3” NPT 

MALE OUTLET

TRUCK SURFACE

TUBE BRACKET

TFT PART XGB-13

SADDLE BRACKET

3” NPT MALE

3” VICTAULIC MALE

FROM PUMP

ALTERNATE:

1) MOUNTING PLATE, 9” SQ.

    TFT PART XGB-23

2) SADDLE BRACKET

    TFT PART XGB-33

To make the Extend-A-Gun as versatile as 

possible, three mounting bracket kits  are offered. 

Each kit has a different upper bracket. The lower 

bracket is the same for all three.

XGB-13 TUBE/SADDLE

BRACKET SET

XGB-23 PLATE/SADDLE

BRACKET SET

XGB-33 SADDLE/SADDLE

BRACKET SET

Summary of Contents for Extend-A-Gun XG12

















Reviews:

Related manuals for Extend-A-Gun XG12