Task Force Tips BlitzForce Portable Monitor Instructions For Installation, Operation And Maintenance Download Page 1

©Copyright Task Force Tips LLC 2006-2021

1

LIX-730 February 3, 2021 Rev09

TASK FORCE TIPS LLC

MADE IN USA · tft.com 

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

INSTRUCTIONS FOR INSTALLATION, OPERATION, AND MAINTENANCE

BlitzForce

Portable Monitor

DANGER

Understand manual before use. Operation of this device without understanding the manual and

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/

serial-number. 
This equipment is intended for use by trained and qualified emergency services personnel for

firefighting. All personnel using this equipment shall have completed a course of education

approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the

operation, servicing, and safety procedures associated with this product. This manual should be

kept available to all operating and maintenance personnel. 

BlitzForce Portable Monitor

BlitzForce OSC Portable Monitor

MAXIMUM FLOW

500 GPM @ 175 PSI 

(2000 L/min @ 12 BAR)

HYDROSTATIC PROOF TEST

900 PSI (62 BAR) per NFPA 1964

Summary of Contents for BlitzForce Portable Monitor

















Reviews: