TASCAM VS-R264 / VS-R265
5
2 - Names and Functions of Parts
Rear panel
7
ANALOG BALANCED IN L/R connectors
These are balanced Euroblock analog audio input connectors.
(HOT, COLD, GND from the left)
8
ANALOG BALANCED OUT L/R connectors
These are balanced Euroblock analog audio output
connectors.
(HOT, COLD, GND from the left)
9
ANALOG UNBALANCED IN connector
This stereo mini jack is an analog audio input.
0
ANALOG UNBALANCED OUT connector
This stereo mini jack is an analog audio output.
q
Link status/activity indicator
Orange indicates that a gigabit Ethernet link has been
established.
w
Gigabit link status indicator
Green indicates that a link is established between the devices.
Blinking indicates that signals are being transmitted between
the devices.
e
HDMI IN port
Connect a DSLR camera or other HDMI source device here.
r
HDMI OUT port
Connect an HDMI monitor or other HDMI sync device here.
t
USB port
Connect (and disconnect) USB storage here. (see “Connecting
and disconnecting USB storage” on page 8)
y
ETHERNET/PoE+ connector
This is an Ethernet port.
Use this to connect to a network, transfer data and control the
unit externally.
Power is received through this connection when connected
to a switching hub that supports PoE Plus power supply.
“Connecting the power” on page 7)
u
DC IN 12V connector
Connect a PS-P1220E AC adapter (sold separately) here when
connected to a switching hub that does not support PoE Plus
power supply.
i
Cord holder
When using a PS-P1220E AC adapter (sold separately), hook
its cord here to prevent accidental disconnection.
Summary of Contents for VS-R264
Page 27: ......
