TASCAM VS-R264 / VS-R265
23
5 - Hardware Reset Function
Conduct a hardware reset to reset all the network settings on the Device Settings screen and all the settings shown in Streaming
Dashboard, including device names.
1. Turn the device off.
2. Press and hold the STREAM button.
3. Turn the device on while continuing to press the STREAM button.
4. Keep pressing the STREAM button for at least 30 seconds while the power is on.
When resetting completes, all indicators except the POWER indicator will blink five times.
5. After a hardware reset of a device completes, the following values will be set to their defaults.
Default value table
Settings screen
Setting item
Default value
Encoders screen
Audio Settings screen
Audio Input Type
HDMI with Embedded Audio
Encoder Settings screen
Video Input Resolution
Auto-Detected
Video Scaling
Passthrough
Limit to 30 FPS
OFF
Encoding Mode
Variable Bitrate
Keyframe Interval
1 second
Quality/Latency
Normal
Video Encoding
H.264 (AVC)
10000 kbps
Profile
High Profile
Audio Encoding
MPEG-4 AAC-LC
128 kbps
RTMP page
RTMP Output
OFF
HLS page
HLS Server
OFF
Number of Segments
10
Segment Length
2 seconds
Multicast page
Multicast Output
OFF
Unicast pages
Unicast Output A
OFF
Unicast Output B
OFF
RTSP page
RTSP Server
OFF
Stream Name
default
Port
554
File recording page
Record to USB
OFF
Filename
VID
FTP Upload page
Upload Recorded Files
OFF
Delete file from storage after upload
OFF
Decoders screen
Audio Settings screen
Balanced Reference Level
-16 dBFS
Volume Output Level
0 dB
Mute
OFF
Decoder Stream Settings
screen
Source Encoder
Other Encoder
Device Settings screen
General page
Name
[Model name]+[MAC address]
Device Roles
Encoder
ON
Decoder
ON
Network page
Address Assignment
DHCP
Summary of Contents for VS-R264
Page 27: ......
