7 − Using the folder finder
TASCAM SS-R1
Creating a new folder
Here’s how to create a new folder inside the working folder.
1 With the folder menu displayed, turn the front
panel
MULTI JOG
dial (or use the remote’s
CUR-
SOR
§
, ¶
keys) to highlight NEW FOLDER.
2 Press the front panel
MULTI JOG
dial (or the
remote’s
ENTER
key.)
3 The RENAME screen will appear. If you want to
edit the name that was automatically created by
the system, you can edit it here. (You are also free
to edit it later.)
For details on editing a name, refer to “Renaming a
folder” on page 47.
4 When you’ve finished editing the name, press the
front panel
MULTI JOG
dial (or the remote’s
EN-
TER
key) to finalize the changes.
A popup
CREATE NEW FOLDER
will appear, and the
new folder will be created.
When the folder has been created, the display will
return to the folder finder screen.
NOTE
A maximum of 255 folders can be created on a
CompactFlash card.
Undeleting a deleted folder (UNDO)
Immediately after deleting a folder, you can recover the
folder by undoing the operation.
This is possible only if the play mode is set to continuous
playback (CONTINUE).
NOTE
When performing the Undo operation, it does not
matter which folder is selected in the folder finder
screen when you open the folder menu screen.
1 Turn the front panel
MULTI JOG
dial (or use the
remote’s
CURSOR
§
, ¶
keys) to highlight
UNDO.
2 Press the front panel
MULTI JOG
dial (or the
remote’s
ENTER
key.)
A confirmation screen will appear.
3 Press the front panel
MULTI JOG
dial (or the
remote’s
ENTER
key).
The folder will be recovered, and you will return to the
folder finder screen. At this time the recovered folder
will be highlighted.
NOTE
If you decide not to perform this undelete operation
(UNDO), press the front panel
TIME (ESC)
key (or the
remote’s
CLR/ESC
key).
NOTE
If there is no file deletion operation that can be
undone, the display will indicate
CAN
,
T UNDO
.
Making a folder the current folder
Here’s how to make the folder in which you’re working the
current folder.
1 With the folder menu screen displayed, turn the
front panel
MULTI JOG
dial (or use the remote’s
CURSOR
§
, ¶
keys) to highlight CURRENT.
2 Press the front panel
MULTI JOG
dial (or the
remote’s
ENTER
key.)
The following popup (
CHANGE CURRENT FOLDER
)
will appear.
The display will return to the folder finder screen.
NOTE
Audio files created by recording will be created in the
current folder. If you create a new folder in which to
store recorded files, you can use the above procedure
to make that new folder the current folder.
