TASCAM SS-R1/SS-R05
43
Applying the compressor while recording
You can apply the SS-R1/SS-R05’s built-in compressor to
the recording source while you record.
A compressor is an effect that holds down peaks in the
audio, making the overall level more consistent and more
listenable.
You’ll use the menu to turn the compressor on/off (for
details on menu operations, refer to “Operations in the
menu screens” on page 16).
1 Press the
MENU
key to access the main menu list
screen.
2 Open the REC menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚
key (or the remote’s
cursor
¥
key) to proceed to the REC PREFERENCE
screen.
5 Select the COMP item.
6 Turn the
MULTI JOG
dial (or use the remote’s
cursor
§
,
¶
keys) to select one of the following as the
compressor mode.
OFF
:
The compressor will not be used when recording.
SOFT
:
Light compression will be applied. This setting
is suitable when recording music.
HARD
:
Strong compression will be applied. This setting
is suitable when the audio source you’re recording
has a low volume. Since the recording volume will be
boosted, it is also suitable when recording a meeting or
conference.
7 When you’ve finished making settings, press the
front panel
TIME (ESC)
key (or the remote’s
CLR/ESC
key) to return to the home screen.
NOTE
This setting is remembered even when you turn off the
power.
6 − Recording
