Tascam SS-CDR250N, Owner'S Manual

Page: 99 / 112

TASCAM SS-CDR250N / SS-R250N
99
14 – Other Settings, Information Screens and Keyboard Operations
Viewing media information
You can view information about the current medium.
1.
Select
MEDIA INFORMATION
on the
MEDIA
page to open the
MEDIA INFORMATION screen. (See “Menu operation proce-
dures” on page 22.)
You can view information about the current medium, and
check its total capacity, open space and other use condi-
tions.
2.
Press the MULTI JOG dial to return to the menu screen.
Restoring factory default settings
You can restore the various settings stored in the backup memo-
ry of the unit to their factory default values.
Use the following menu procedures to do so.
1.
Select
FACTORY PRESET
on the
SYSTEM 1
page. (See “Menu
operation procedures” on page 22.)
2.
Press the MULTI JOG dial.
A confirmation pop-up message will appear.
NOTE
Press the MENU [JOG] button to cancel execution.
3.
Press the MULTI JOG dial again to restore the factory de-
fault settings.
A “
READING MEDIA...
” pop-up will appear. After it com-
pletes, the Menu Screen will reopen.
Saving and loading user settings
This unit can store three sets of user setting data in its built-in
memory.
Saving user settings
This unit can save user setting data in its built-in memory.
1.
Select
SAVE USER PRESET
on the
SYSTEM 1
page to open
the
SAVE USER PRESET
screen. (See “Menu operation proce-
dures” on page 22.)
2.
Select
SAVE TO USER1
–
SAVE TO USER3
as the destination
to save the settings, and press the MULTI JOG dial.
A confirmation pop-up message will appear.
3.
When the confirmation message is open, press and hold
the MULTI JOG dial to begin saving the user settings to the
built-in memory.
After saving completes, the
SAVE USER PRESET
screen re-
opens.
Loading user settings
This unit can load saved user settings from its built-in memory.
1.
Select
LOAD USER PRESET
on the
SYSTEM 1
page to open
the
LOAD USER PRESET
screen. (See “Menu operation proce-
dures” on page 22.)
2.
Select LOAD USER1 – LOAD USER3 to load the settings in that
preset, and press the MULTI JOG dial.
A confirmation pop-up message will appear.
3.
When the confirmation message is open, press and hold the
MULTI JOG dial to begin loading the user settings from the
built-in memory.
After saving completes, the
LOAD USER PRESET
screen re-
opens.