manualshive.com logo in svg

Tascam SS-CDR250N, Owner'S Manual

Share
Download
Tascam SS-CDR250N Owner'S Manual Download Page 27

TASCAM  SS-CDR250N / SS-R250N

 27

3 – Preparation

Inserting and removing SD cards

Inserting SD cards

Insert an SD card into an SD card slot on the front of the unit to 
enable playback and recording by this unit.

NOTE

SD cards can be inserted whether or not the unit is on or off (in 
standby).

1. 

Pull the SD card slot cover forward to open it.

2. 

Inserted SD cards with the correct orientation.
The label should be up and the connector should be insert-
ed toward the back.

3. 

Close the card slot cover.

NOTE

If the SD card slot cover cannot be closed, remove the SD 
card and insert it again.

Removing SD cards

Turn the unit off or stop operation before removing an SD card.

CAUTION

Never remove an SD card from the unit when it is being ac-
cessed, such as in the cases listed below.
Doing so could cause proper recording to fail, recorded data 
to be lost, and sudden loud noises from monitoring equip-
ment, which might damage the equipment, harm hearing or 
cause other trouble.
Moreover, removing a card during 

FIRMWARE UPDATE

 execu-

tion could result in the unit becoming unable to start up or 
operate properly.

 

o

When recording

 

o

During playback

 

o

During 

SYSTEM BACKUP IMPORT

 or 

EXPORT

 execution

 

o

During 

FIRMWARE UPDATE

 execution (See “Firmware up-

date procedures (USB flash drives and SD cards only)” on 
page 101.)

 

o

When the 

BROWSE

 screen is open and the SD card is being 

accessed

1. 

Pull the SD card slot cover forward to open it.

2. 

Press the SD card in gently to make it to come forward.

3. 

Pull the SD card out by hand.

Using the security screw

You can use the included security screw to lock the card slot cov-
er switch.
Use a Phillips (+) driver to install/remove the security screw.

Summary of Contents for SS-CDR250N

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands