TASCAM SS-CDR250N / SS-R250N
23
3 – Preparation
Making connections
This is an example of SS-CDR250N connections.
Precautions before making connections
0
Carefully read the operation manuals of the devices to be connected and then connect them correctly.
0
Before making connections, turn this unit and all equipment to be connected off (standby).
0
Install all connected devices, including this unit, so that they are powered from the same line. When using a power strip or similar de-
vice, be sure to use one that has high current capacity (thick cable) in order to minimize fluctuations in power voltage.
ANALOG IN
(BALANCED)
L
R
ANALOG
IN
(UNBALANCED)
L
R
ANALOG
OUT
(UNBALANCED)
L
R
AES/EBU
IN
OUT
DIGITAL
IN
(S/PDIF)
DIGITAL
OUT
(S/PDIF)
TASCAM RC-3F (sold separately)
Headphones
Mixer, recorder, amp, etc.
Digital mixer, digital recorder,
digital amp, etc.
TASCAM RC-20
(sold separately)
TASCAM RC-SS20
(sold separately)
TASCAM RC-SS150 (sold separately)
or computer RS-232C port
Microphones
(or mixer, recorder, amp, etc.)
Network with FTP server,
control computer, etc.
Optional card
(sold separately)
Examples of connections to a SS-CDR250N
