Tascam Sonicview 16, Reference Manual

Page: 137 / 188

8 – Saving and recalling setting data
Importing snapshots
1. Tap the snapshot name area (
2
) on the Menu Screen to
open the Snapshot List Screen. (See “Snapshot List Screen”
on page 130.)
2. Tap the IMPORT/EXPORT button on the Snapshot List
Screen to open the SNAPSHOT IMPORT/EXPORT Screen.
(See “SNAPSHOT IMPORT / EXPORT screen” on page 135.)
3. Connect the import source media.
4. Use the media selection button (
1
) to select the media to
use as the import source. (See “
1
Media selection button”
on page 135.)
5. Tap the EXPORT/IMPORT mode (
5
) button to switch to
import mode.
6. In the list of data on the selected media (
6
), tap the
snapshot data to be imported.
The snapshot data to be imported will be highlighted.
7. In the list of snapshots in the unit’s internal storage (
3
), tap
the input destination data slot.
The import destination data slot and the IMPORT button
will appear highlighted.
8. Tap the IMPORT button.
The imported snapshot data will be added to the snapshot
list (
3
).
NOTE
i
An OVERWRITE confirmation message will be shown if
snapshot data with the same name as the import source
already exists in the import destination data slot.
A REPLACE confirmation message will be shown if snapshot
data with a different name from the import source exists in
the import destination data slot.
i
Tap the CANCEL button to cancel importing and close the
confirmation message.
i
Tap the OVERWRITE button to import and overwrite the
data of the snapshot with the same name and close the
confirmation message.
i
Tap the REPLACE button to import and overwrite
snapshot data with a different name and close the
confirmation message.
i
The following message will be shown if the import
destination slot is locked.
"Cannot Import. Target Locked."
TASCAM Sonicview 16/Sonicview 24
137