manualshive.com logo in svg

Tascam SD-20M, Owner'S Manual

Share
Download
Tascam SD-20M Owner'S Manual Download Page 38

38 

TASCAM SD-20M

10 – Troubleshooting

If you are having trouble with the operation of this unit, please 

try the following before seeking repair. If these measures do not 

solve the problem, please contact the store where you bought 

the unit or TEAC customer support.

 

8

The unit will not turn on.

•  Confirm that the batteries are not dead.

•  Confirm that the batteries are installed with the correct 

¥

/

^

 orientation.

•  Confirm that the included AC adapter (TASCAM PS-P1220E) 

is securely connected to both the outlet and the unit power 

connector.

 

8

The unit turns off automatically.

Is the automatic power saving function on?(See “Set the 

automatic power saving function” on page 35.)

 

o

Since this unit complies with the European Standby Power 

Regulations (ErP), the automatic power saving function 

operates regardless of whether the unit is being powered 

by an AC adapter or batteries. If you do not want to use 

the automatic power saving function, set it to “

OFF

”. (The 

factory default setting is “30min”.)

 

8

The SD card is not recognized.

•  Confirm that the SD card is inserted completely.

 

8

Playback is not possible.

•  If you are trying to play a WAV file, confirm that the 

sampling frequency is supported by this unit.

•  If you are trying to play an MP3 file, confirm that the bit rate 

is supported by this unit.

 

8

No sound is output.

•  Check connections with the monitoring system again. 

Check the volume of the amplifier as well.

 

8

Recording is not possible.

•  Check connections with other equipment again.

•  Check the input settings again.

•  Confirm that the input level is not too low.

•  Confirm that the SD card is not full.

•  Confirm that the number of files has not reached the 

maximum that the unit can handle.

•  Check the audio source level.

 

8

The input level is low.

•  Confirm that the input level setting is not too low.

•  Confirm that the output level of any connected device is 

not too low.

 

8

The sound I am trying to record sounds distorted.

•  Confirm that the input level setting is not too high.

 

8

The playback sounds unnatural.

•  Confirm that the playback speed has not been changed.

 

8

I cannot erase a file.

•  Confirm that you are not trying to erase a write-protected 

file that has been copied from a computer.

Summary of Contents for SD-20M













































Reviews:

No comments

Brands by name

Popular brands

Load more brands