manualshive.com logo in svg

Tascam SD-20M, Owner'S Manual

Share
Download
Tascam SD-20M Owner'S Manual Download Page 26

26 

TASCAM SD-20M

4 – Recording

Recording duration

The table below shows maximum recording times by file format on SD/SDHC/SDXC cards of different capacities (in hours and minutes).

File format (recording setting)

SD/SDHC/SDXC card capacity

1 GB

4 GB

8 GB

32 GB

WAV/BWF 16-bit (STEREO)

44.1 kHz

1:34

6:17

12:35

50:23

48 kHz

1:26

5:47

11:34

46:17

96 kHz

00:43

2:53

5:47

23:08

WAV/BWF 24-bit (STEREO)

44.1 kHz

1:02

4:11

8:23

33:35

48 kHz

00:57

3:51

7:42

30:51

96 kHz

00:28

1:55

3:51

15:25

MP3 

(STEREO/MONO)

32 kbps

44.1 kHz/48 kHz

69:26

277:00

555:00

2222:00

64 kbps

44.1 kHz/48 kHz

34:43

138:00

277:00

1111:00

96 kbps

44.1 kHz/48 kHz

23:08

92:35

185:00

740:00

128 kbps

44.1 kHz/48 kHz

17:21

69:26

138:00

555:00

192 kbps

44.1 kHz/48 kHz

11:34

46:17

92:35

370:00

256 kbps

44.1 kHz/48 kHz

8:40

34:43

69:26

277:00

320 kbps

44.1 kHz/48 kHz

6:56

27:46

55:33

222:00

•  The recording times shown above are estimates. They might differ depending on the SD/SDHC/SDXC card in use.

•  The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the 

SD/SDHC/SDXC card.

•  Recording automatically stops if recording time exceeds 24 hours.

•  If recorded in mono WAV format, the maximum recording time will be double the figures above.

•  When using dual/4-channel recording in WAV/BWF format, the maximum recording time will be about half the figures above.

Summary of Contents for SD-20M













































Reviews:

No comments

Brands by name

Popular brands

Load more brands