32
TASCAM Portacapture X6
6 - Recording apps
6 - 8 Recording with the PODCAST app
This app is good for recording podcasts with up to 2 people.
Screen overview
Recording
level
Mute buttons
Remaining bat-
tery charge
MASTER level
Sound pads
Project status
bar
MASTER
level setting
Faders
Input settings
Input on/
off status
Shortcut Menu
Press the MENU button on the bottom left of the unit to show the fol-
lowing menu.
LAUNCHER
App switching and unit settings
(page 9)
BROWSE
File operations (page 41)
GENERAL SETTINGS
REC SETTINGS
Recording settings and operations
(page 34)
INPUT SELECT
Track number and input jack
assignments (page 20)
Using the wheel
After tapping a GAIN, fader or pan control or the MASTER level, the
wheel can be turned left and right to adjust the setting precisely.
This is convenient for precise adjustments after making rough value
changes by sliding.
Setting input levels
1.
Open the MIXER screen.
2.
Tap the input settings icon.
3.
While inputting the voice and watching the level meters, adjust the
GAIN so that they average around −12 dB and the PEAK indicators
do not light.
NOTE
o
If the input level exceeds –2 dB, the PEAK indicator on the unit will
light.
o
The recording sound might distort when the PEAK indicator lights.
o
If the entire level meter becomes red, the analog circuit is overload-
ing.
MIXER screen
INPUT screen
e
Tap the input settings icon.
Slide the GAIN fader to adjust
the input level.
Using the mixer
Slide the faders to adjust the mix balance.
MASTER level setting
Use this to adjust the level of the mix of all tracks.
After adjusting the balance of the individual track levels, use this when
you want to adjust the overall level.
Change the setting below the slider to MONO if you want to make the
mix of all the tracks mono.
MIXER screen
e
Tap the MASTER level setting.
Slide the fader left and right to
adjust the level.
Making sound pad settings
Sounds can be assigned to the sound pads, and how they play when the
buttons are pushed can be set.
Selecting the button to set
MIXER screen
e
Tap the pad settings on the right
side.
Tap the button of the sound pad
to set.
