manualshive.com logo in svg

Tascam LR-10, Owner'S Manual

Share
Download
Tascam LR-10 Owner'S Manual Download Page 75

TASCAM LR-10  

75

When you want to restart loop playback, press the LOOP 
button briefly to start loop playback of the last used loop.
In the LOOP setting area shown at the bottom of the display, 
the word 

LOOP

 is followed by a number, which shows the 

current loop. Use the VALUE (+/–) buttons to change the loop 
number. During loop playback, you can change this number 
to start loop playback of a different loop if the loop assigned 
to that number has IN (starting) and OUT (ending) points set.

Repeat and single track playback

You can repeatedly play back the current file (one file) or 
multiple files within the designated playback area. You can 
also play just one file.
1.  Press the MENU button to open the 

MENU

 screen.

2.  Use the 

§

/BROWSE and 

/MIC buttons to select 

PLAY 

MODE

 and press the 

Á

 button or 

¯

 button.

3.  Use the 

§

/BROWSE and 

/MIC buttons to select the 

REPEAT

 item, and use the VALUE (+/–) buttons to set the 

playback mode.

OFF (default)

Play all tracks in the playback area in sequence. (This is the 
ordinary playback mode.)

SINGLE

Play one file without repeating.
The 

 

icon appears on the Home Screen.

1 REPEAT

Play the currently playing file repeatedly.
The 

 

icon appears on the Home Screen.

ALL REPEAT

Play all the files in the selected playback area repeatedly.
The 

 

icon appears on the Home Screen.

NOTE

If you start loop playback, the 

REPEAT

 item automatically 

switches to 

OFF

 if it is in a different mode.

10–Loop Playback/Repeat Playback/Single Track Playback

Summary of Contents for LR-10





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands