TASCAM iXR
5
2 – Names and Functions of Parts
Rear panel
w
Kensington Security Slot
e
PC/MAC/POWER port (USB B-type)
When using this unit with an iOS device, use the included
USB cable to connect the USB power adapter included with
the iOS device. Doing this allows this port to function as a
power supply connector.
When using this unit with a computer, use the included USB
cable to connect it to the computer.
r
port (USB A-type)
To connect this unit with an iOS device, use the Light-
ning-USB cable included with the iOS device.
NOTE
This port will not provide power to the iOS device, nor will it
draw power from the device.
t
PHANTOM switch
Use this switch to p48V phantom power to the IN
1
/IN
2
jacks.
y
MIDI OUT connector
This 5-pin DIN is a standard MIDI output jack.
This outputs MIDI signals.
u
MIDI IN connector
This 5-pin DIN is a standard MIDI input jack.
Use this to input MIDI signals.
i
LINE OUT 1/L and 2/R jacks
These standard TRS jacks are analog line outputs.
Use the Settings Panel to set the signals output from the
LINE OUT 1/L and 2/R jacks.
(Tip: HOT, Ring: COLD, Sleeve: GND)
