TASCAM HS-4000
81
9 – Playlist mode
Deleting a playlist
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Touch the
e
button for the project that contains the playlist
you want to delete to open the session selection screen.
If it is not the current project, a pop-up window appears
confirming that you want to load it.
3. Touch the
e
button for the session that contains the playlist
you want to delete to open the playlist selection screen.
If it is not the current project, a pop-up window appears
confirming that you want to load it. Touch the OK button.
4. Select the playlist that you want to delete.
Touch the MULTI SELECT button to enable the selection of
multiple playlists.
5. Touch the MENU button on the Playlist selection screen to
open a pull-up menu.
6. Touch the DELETE button in the pull-up menu.
NOTE
If the loaded playlist is selected, the DELETE button in the
pull-up menu item is disabled.
7. Touch the OK button or press the DATA dial when a confir-
mation pop-up message appears.
During erasure, a progress status pop-up appears.
When erasure completes, the pop-up disappears.
Editing a playlist (adding, clearing and
editing entries)
A playback unit in a playlist is called an “entry”.
A maximum of 100 entries can be added to a playlist.
Only takes (files) in the session in which the playlist was created
can be added as entries.
When a take (file) that is in another session in the same project is
added to a playlist, it is copied to the session where the playlist
was made.
Even during playback of a playlist, entries can be added to or
removed from it and their names can be changed.
The entry that is currently playing, however, cannot be changed.
Use the Entry list and Assign file screens to edit playlists.
Entry list screen
To open this screen, touch a take or entry name button on the
Home Screen to open a pull-down menu and touch the ENTRY
LIST button, or touch the ENTRY
g
part of the ENTRY
gt
ASSIGN button on the ASSIGN screen.
1
ENTRY
gt
ASSIGN button
Switches between the entry list and ASSIGN file screens.
Touch the \ ASSIGN part to open the ASSIGN file screen.
2
A/B buttons/indicators (dual mode only)
These show which player’s playlist is currently selected. The
selected player’s button appears light blue.
Touch the A button to open the playlist entry list for Player A
or the B button to open the playlist entry list for Player B.
3
Session and playlist names
This shows the current session and playlist names.
When entries have been edited but not saved, * appears.
4
START TC/LENGTH button
Touch this area to switch between showing the starting
time (START TC) and the length (LENGTH) in the START
TC/LENGTH column. The one shown in white is currently
displayed.
