Tascam HS-4000 Owner'S Manual Download Page 65

Page: 65 / 152

TASCAM HS-4000

7 – Timeline mode

Removing fade ins and outs (Remove Fade

IN/Remove Fade Out)

1. Press the HOME key on the front panel to open the Home

Screen.

2. Touch the EDIT MODE button to enter edit mode. If

"TIMELINE Rec Tracks" is set to "2trx2", select the tracks with

the fade in/out that you want to remove.

3. Move the timeline cursor to the region with the fade in/out

you want to remove.

4. Touch the Fade/Level button to open a pull-up menu.

• Touch the Remove Fade IN button to remove the fade in

from that region.

• Touch the Remove Fade Out button to remove the fade

out from that region.

5. When removing the fade in/out completes, the Home

Screen will be shown again after a pop-up message appears.

At this time, the Fade/Level pull-up menu will still be open.

Setting the playback level of a designated

region (Level)

You can set the playback level of an entire designated region

(from the end of the fade to the beginning of the fade out).
1. Press the HOME key on the front panel to open the Home

Screen.

2. Touch the EDIT MODE button to enter edit mode.

If "TIMELINE Rec Tracks" is set to "2trx2", select the tracks for

which you want to set the playback level.

NOTE

You cannot set the playback level when multiple files (1-2tr

and 3-4tr) are selected. In this case, touching the Level

button in the Fader/Level menu causes a message to appear.

3. Move the timeline cursor to the region for which you want

to change the playback level.

4. Touch the Fade/Level button to open a pull-up menu.

5. Touch the Level button in the pull-up menu.

Doing this, the region beneath the timeline cursor of the

selected track appears yellow and will be subject to level

adjustment.

6. A level knob will appear above the Level button. Use the

DATA dial to turn it and set the playback level.
Setting range: −∞, −120 dB – +10.0 dB

7. Press the Level button again to close the level knob pop-up.

(The set playback level value will be retained for the selected

region.)

Summary of Contents for HS-4000

























































































































































Search results

Summary of Contents for HS-4000

Reviews:

Related manuals for HS-4000

Brands by name

Popular brands

Tascam HS-4000, Owner'S Manual

Search results

Summary of Contents for HS-4000

Reviews:

Related manuals for HS-4000

Brands by name

Popular brands