Tascam HS-2000 Owner'S Manual Download Page 80

Page: 80 / 156

TASCAM HS-2000

8 – Take mode

Undoing the previous take edit

You can undo the previous take divide or combine

operation.

1. Press the HOME key on the front panel to open the

Home Screen.

2. Touch the

EDIT

button to open a pull-up menu.

3. Touch the

UNDO

button in the pull-up menu. After

the edit is undone, a pop-up window will appear

momentarily, and then the Home Screen will reopen.

In this case, the EDIT pull-up menu will remain open.

NOTE

If no editing has been conducted, the

•

UNDO

button is

disabled. The

UNDO

button appears with white letters

when it is possible to undo an edit.

The take mode edit history will be erased by the

•

following actions:

Turning off the power of this unit

•

Loading a project or session

•

Changing the operation mode

•

Recording

•

Redoing a take edit

After undoing a take edit, you can redo it, but only once.

1. Press the HOME key on the front panel to open the

Home Screen.

2. Touch the

EDIT

button to open a pull-up menu.

3. Touch the

REDO

button on the pull-up menu. When

the edit is redone, a pop-up window will appear

momentarily, and then the Home Screen will reopen.

In this case, the EDIT pull-up menu will remain open.

NOTE

If no editing has been conducted, the

•

UNDO

button is

disabled. The

UNDO

button appears with white letters

when it is possible to undo an edit.

The take mode edit history will be erased by the

•

following actions:

Turning off the power of this unit

•

Loading a project or session

•

Changing the operation mode

•

Recording

•

Summary of Contents for HS-2000





























































































































































Search results

Summary of Contents for HS-2000

Reviews:

Related manuals for HS-2000

Brands by name

Popular brands

Tascam HS-2000, Owner'S Manual

Search results

Summary of Contents for HS-2000

Reviews:

Related manuals for HS-2000

Brands by name

Popular brands