68
TASCAM HS-2000
7 – Timeline mode
Undoing the previous edit (UNDO)
You can undo the previous timeline edit.
1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch the
EDIT MODE
button to enter the edit
mode.
3. Touch the
EDIT
button to open a pull-up menu.
4. Touch the
UNDO
button in the pull-up menu. After
the edit is undone, a pop-up window will appear
momentarily, and then the Home Screen will reopen.
In this case, the EDIT pull-up menu will remain open.
NOTE
The Fade/Level pull-up menu also has an
•
UNDO
button that can be used to undo edits.
The
•
UNDO
button appears with white letters when it is
possible to undo an edit. The
UNDO
button is disabled
if no editing has been conducted.
In timeline mode, up to 10 of the most recent
•
recording/editing operations can be retained as an
editing history. You can undo and redo edits within
this history. However, as the numbers of edits and
regions increase, the number of operations that can be
stored may decrease.
The timeline mode editing history will be cleared by
•
the following actions:
Turning off the power of this unit
•
Loading a project or session
•
Loading AES31 edit information
•
Changing the operation mode
•
Redoing an edit (REDO)
After undoing an edit, you can redo it.
1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch the
EDIT MODE
button to enter the edit
mode.
3. Touch the
EDIT
button to open a pull-up menu.
4. Touch the
REDO
button in the pull-up menu. After
the edit is redone, a pop-up window will appear
momentarily, and then the Home Screen will reopen.
In this case, the EDIT pull-up menu will remain open.
NOTE
The Fade/Level pull-up menu also has an
•
REDO
button that can be used to redo edits.
If no edit has been undone, the
•
REDO
button is
disabled. The
REDO
button appears with white letters
when it is possible to redo an edit.
In timeline mode, up to 10 of the most recent
•
recording/editing operations can be retained as an
editing history. You can undo and redo edits within
this history. However, as the numbers of edits and
regions increase, the number of operations that can be
stored may decrease.
The timeline mode edit history will be cleared by the
•
following actions:
Turning off the power of this unit
•
Loading a project or session
•
Loading AES31 edit information
•
Changing the operation mode
•
