Tascam DR-701D, Reference Manual

Page: 8 / 46

8
TASCAM DR-701D
2 – Names and functions of parts
Right side
NOTE
When connecting and using plugs from external devices,
do not apply excessive force to the plugs. In particular,
be careful not to apply too much force when using a
standard to mini plug adapter. Doing so could damage the
equipment.
l
HDMI IN port
Connect a DSLR camera or other HDMI source device here.
;
HDMI OUT port
Connect an HDMI monitor or other HDMI sync device here.
z
Micro USB port
Use the included USB cable to connect with a computer USB
port.(see “8 – Connecting with a Computer” on page 35)
Power can be supplied through the USB cable provided with
the unit or a TASCAM PS-P515U AC adapter (sold separately).
CAUTION
The unit should be connected directly to the computer, not
through a USB hub.
x
IN 4 connector (XLR/TRS)
This balanced analog jack is an XLR mic and standard TRS
jack input.
XLR (1: GND, 2: HOT, 3: COLD)
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
c
IN connector (3.5mm stereo mini jack)
Use a stereo mini jack cable to connect this with the camera
audio output jack.
Refer to the camera’s operation manual to identify
connectors on the camera.(see “Camera connections” on
page 16)
v
OUT jack (3.5mm stereo mini jack)
Use a stereo mini jack cable to connect this with the camera
external input jack.
Use the
OUTPUT LEVEL
page
CAMERA
item to adjust
the volume output from this jack.(see “Adjusting the
playback volume” on page 18)
Refer to the camera’s operation manual to identify
connectors on the camera.(see “Camera connections” on
page 16)
b
LINE OUT jack (3.5mm stereo mini jack)
Use a stereo mini jack cable to connect this with the line
input jack of an external device.
Use the
OUTPUT LEVEL
page
LINE
item to adjust the
volume output from this jack.(see “Adjusting the playback
volume” on page 18)
n
TIME CODE IN connector
Use a BNC cable to connect this with the time code output
connector of an external device.(see “Connecting a time
code generator” on page 17)
Top
m
DSLR camera attachment bracket
Use this bracket, which is preinstalled on the unit, with the
DSLR mounting screw.
If you do not want to use this bracket, use a coin or other
tool to remove the four attachment screws.
,
DSLR camera mounting screw (1/4-inch)
Use to attach this unit to the bottom of a camera or a rack
that supports camera mounting screws, for example.
.
Accessory shoe
You can remove the included DSLR camera attachment
bracket to use the accessory shoe.