background image

TASCAM  DR-60D

 

83

9 – Connecting with a computer

Transferring files to a computer

1.  Click the “DR-60D” drive on the computer screen to show the 

“MUSIC” and “UTILITY” folders.

2.  Open the “MUSIC” folder and drag and drop the files that you 

want to transfer to the computer to destinations of your choice.

Transferring files from a computer

1.  Click the “DR-60D” drive on the computer screen to show the 

“MUSIC” and “UTILITY” folders.

2.  Drag and drop files on the computer that you want to transfer 

to the unit to the “MUSIC” folder.

TIP

• 

You can manage the “MUSIC” folder from the computer.

• 

You can create subfolders in the “MUSIC” folder up to the 

second level for use with this unit. The DR-60D cannot recognize 

subfolders and audio files on the third level or below.

• 

Since you can set the DR-60D to only play the contents of a 

specific folder, you can organize files into genres, artists or other 

categories as you like.

• 

If you name the subfolders and music files, these names will 

appear on the Home screen or 

BROWSE

 screen of this unit.

Disconnecting from a computer

Before disconnecting the USB cable, use the proper procedures for 

your computer to unmount the DR-60D (as an external drive). The 

power turns off (standby) after disconnecting the USB cable. 
See the computer’s operation manual for instructions about how to 

unmount an external drive. 

Summary of Contents for DR-60D





































































































Reviews: