Tascam DR-40 Reference Manual Download Page 71

Page: 71 / 115

TASCAM DR-40

6 – Playback

Playlist

You can make a list of files for playback (playlist). On the

PLAY

SETTING

Screen if you select

PLAYLIST

for the

AREA

item, you

can set playback to just the files in your playlist.

Adding files to the playlist

1 Press the MENU button to open the

screen.

2 Use the + or − button to select

BROWSE

, and press the

ENTER/MARK or

button.

BROWSE

screen appears.

NOTE

For an explanation of how to use the

BROWSE

Screen, see

“Screen navigation” on page 63.
3 Use the + or − button to select the file you want to add

to the playlist, and press the QUICK button.

NOTE

For details about how to select the file, see “Screen navigation”
on page 63.

A pop-up window appears.

4 Use the + or – button to select

ADD

LIST

5 Press the ENTER/MARK button.

The file is added to the playlist and the popup window
closes.

6 Repeat steps 3, 4, and 5 as necessary to add more files

to the playlist. The files are numbered in the order that

they are added.

Editing the playlist

You can view and edit the playlist you have made on the

PLAYLIST

screen.

You can also use this screen to play files and to edit the
playlist.
1 Press the MENU button to open the

screen.

2 Use the + or − button to select

BROWSE

, and press the

ENTER/MARK or

button.

BROWSE

screen appears.

3 Use the

button to move to the top folder level.

Summary of Contents for DR-40




















































































































Search results

Summary of Contents for DR-40

Reviews:

Related manuals for DR-40

Brands by name

Popular brands

Tascam DR-40, Reference Manual

Search results

Summary of Contents for DR-40

Reviews:

Related manuals for DR-40

Brands by name

Popular brands